eas-cli

EAS command line tool

Installation
Usage
Commands

Installation

npm install -g eas-cli
# or
yarn global add eas-cli

Enforcing eas-cli version for your project

If you want to enforce the eas-cli version for your project, use the "cli.version" field in eas.json. Installing eas-cli to your project dependencies is strongly discouraged because it may cause dependency conflicts that are difficult to debug.

An example of eas.json that enforces eas-cli in version 1.0.0 or newer:

{
  "cli": {
    "version": ">=1.0.0"
  },
  "build": {
    // build profiles
  },
  "submit": {
    // submit profiles
  }
}

Learn more: https://docs.expo.dev/build-reference/eas-json/

Usage

eas COMMAND
# runs the command
eas (-v|--version|version)
# prints the version
eas --help COMMAND
# outputs help for specific command

Commands

eas account:login
eas account:logout
eas account:view
eas analytics [STATUS]
eas autocomplete [SHELL]
eas branch:create [NAME]
eas branch:delete [NAME]
eas branch:list
eas branch:rename
eas branch:view [NAME]
eas build
eas build:cancel [BUILD_ID]
eas build:configure
eas build:inspect
eas build:list
eas build:resign
eas build:run
eas build:submit
eas build:version:get
eas build:version:set
eas build:version:sync
eas build:view [BUILD_ID]
eas channel:create [NAME]
eas channel:edit [NAME]
eas channel:list
eas channel:rollout [CHANNEL]
eas channel:view [NAME]
eas config
eas credentials
eas device:create
eas device:delete
eas device:list
eas device:rename
eas device:view [UDID]
eas diagnostics
eas help [COMMAND]
eas init
eas login
eas logout
eas metadata:lint
eas metadata:pull
eas metadata:push
eas open
eas project:info
eas project:init
eas secret:create
eas secret:delete
eas secret:list
eas secret:push
eas submit
eas update
eas update:configure
eas update:delete GROUPID
eas update:list
eas update:republish
eas update:roll-back-to-embedded
eas update:rollback
eas update:view GROUPID
eas webhook:create
eas webhook:delete [ID]
eas webhook:list
eas webhook:update
eas webhook:view ID
eas whoami

`eas account:login`

log in with your Expo account

USAGE
  $ eas account:login

DESCRIPTION
  log in with your Expo account

ALIASES
  $ eas login

See code: src/commands/account/login.ts

`eas account:logout`

log out

USAGE
  $ eas account:logout

DESCRIPTION
  log out

ALIASES
  $ eas logout

See code: src/commands/account/logout.ts

`eas account:view`

show the username you are logged in as

USAGE
  $ eas account:view

DESCRIPTION
  show the username you are logged in as

ALIASES
  $ eas whoami

See code: src/commands/account/view.ts

`eas analytics [STATUS]`

display or change analytics settings

USAGE
  $ eas analytics [STATUS]

DESCRIPTION
  display or change analytics settings

See code: src/commands/analytics.ts

`eas autocomplete [SHELL]`

display autocomplete installation instructions

USAGE
  $ eas autocomplete [SHELL] [-r]

ARGUMENTS
  SHELL  (zsh|bash|powershell) Shell type

FLAGS
  -r, --refresh-cache  Refresh cache (ignores displaying instructions)

DESCRIPTION
  display autocomplete installation instructions

EXAMPLES
  $ eas autocomplete

  $ eas autocomplete bash

  $ eas autocomplete zsh

  $ eas autocomplete powershell

  $ eas autocomplete --refresh-cache

See code: @oclif/plugin-autocomplete

`eas branch:create [NAME]`

create a branch

USAGE
  $ eas branch:create [NAME] [--json --non-interactive]

ARGUMENTS
  NAME  Name of the branch to create

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  create a branch

See code: src/commands/branch/create.ts

`eas branch:delete [NAME]`

delete a branch

USAGE
  $ eas branch:delete [NAME] [--json --non-interactive]

ARGUMENTS
  NAME  Name of the branch to delete

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  delete a branch

See code: src/commands/branch/delete.ts

`eas branch:list`

list all branches

USAGE
  $ eas branch:list [--offset <value>] [--limit <value>] [--json --non-interactive]

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>    The number of items to fetch each query. Defaults to 50 and is capped at 100.
  --non-interactive  Run the command in non-interactive mode.
  --offset=<value>   Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  list all branches

See code: src/commands/branch/list.ts

`eas branch:rename`

rename a branch

USAGE
  $ eas branch:rename [--from <value>] [--to <value>] [--json --non-interactive]

FLAGS
  --from=<value>     current name of the branch.
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.
  --to=<value>       new name of the branch.

DESCRIPTION
  rename a branch

See code: src/commands/branch/rename.ts

`eas branch:view [NAME]`

view a branch

USAGE
  $ eas branch:view [NAME] [--offset <value>] [--limit <value>] [--json --non-interactive]

ARGUMENTS
  NAME  Name of the branch to view

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>    The number of items to fetch each query. Defaults to 25 and is capped at 50.
  --non-interactive  Run the command in non-interactive mode.
  --offset=<value>   Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  view a branch

See code: src/commands/branch/view.ts

`eas build`

start a build

USAGE
  $ eas build [-p android|ios|all] [-e <value>] [--local] [--output <value>] [--wait] [--clear-cache]
    [--auto-submit | --auto-submit-with-profile <value>] [-m <value>] [--json --non-interactive]

FLAGS
  -e, --profile=PROFILE_NAME               Name of the build profile from eas.json. Defaults to "production" if defined
                                           in eas.json.
  -m, --message=<value>                    A short message describing the build
  -p, --platform=(android|ios|all)
  --auto-submit                            Submit on build complete using the submit profile with the same name as the
                                           build profile
  --auto-submit-with-profile=PROFILE_NAME  Submit on build complete using the submit profile with provided name
  --clear-cache                            Clear cache before the build
  --json                                   Enable JSON output, non-JSON messages will be printed to stderr.
  --local                                  Run build locally [experimental]
  --non-interactive                        Run the command in non-interactive mode.
  --output=<value>                         Output path for local build
  --[no-]wait                              Wait for build(s) to complete

DESCRIPTION
  start a build

See code: src/commands/build/index.ts

`eas build:cancel [BUILD_ID]`

cancel a build

USAGE
  $ eas build:cancel [BUILD_ID] [--non-interactive]

FLAGS
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  cancel a build

See code: src/commands/build/cancel.ts

`eas build:configure`

configure the project to support EAS Build

USAGE
  $ eas build:configure [-p android|ios|all]

FLAGS
  -p, --platform=(android|ios|all)  Platform to configure

DESCRIPTION
  configure the project to support EAS Build

See code: src/commands/build/configure.ts

`eas build:inspect`

inspect the state of the project at specific build stages, useful for troubleshooting

USAGE
  $ eas build:inspect -p android|ios -s archive|pre-build|post-build -o <value> [-e <value>] [--force] [-v]

FLAGS
  -e, --profile=PROFILE_NAME
      Name of the build profile from eas.json. Defaults to "production" if defined in eas.json.

  -o, --output=OUTPUT_DIRECTORY
      (required) Output directory.

  -p, --platform=(android|ios)
      (required)

  -s, --stage=(archive|pre-build|post-build)
      (required) Stage of the build you want to inspect.
      archive - builds the project archive that would be uploaded to EAS when building
      pre-build - prepares the project to be built with Gradle/Xcode. Does not run the native build.
      post-build - builds the native project and leaves the output directory for inspection

  -v, --verbose

  --force
      Delete OUTPUT_DIRECTORY if it already exists.

DESCRIPTION
  inspect the state of the project at specific build stages, useful for troubleshooting

See code: src/commands/build/inspect.ts

`eas build:list`

list all builds for your project

USAGE
  $ eas build:list [--platform all|android|ios] [--status
    new|in-queue|in-progress|pending-cancel|errored|finished|canceled] [--distribution store|internal|simulator]
    [--channel <value>] [--appVersion <value>] [--appBuildVersion <value>] [--sdkVersion <value>] [--runtimeVersion
    <value>] [--appIdentifier <value>] [--buildProfile <value>] [--gitCommitHash <value>] [--offset <value>] [--limit
    <value>] [--json --non-interactive]

FLAGS
  --appBuildVersion=<value>
  --appIdentifier=<value>
  --appVersion=<value>
  --buildProfile=<value>
  --channel=<value>
  --distribution=(store|internal|simulator)
  --gitCommitHash=<value>
  --json                                                                        Enable JSON output, non-JSON messages
                                                                                will be printed to stderr.
  --limit=<value>                                                               The number of items to fetch each query.
                                                                                Defaults to 10 and is capped at 50.
  --non-interactive                                                             Run the command in non-interactive mode.
  --offset=<value>                                                              Start queries from specified index. Use
                                                                                for paginating results. Defaults to 0.
  --platform=(all|android|ios)
  --runtimeVersion=<value>
  --sdkVersion=<value>
  --status=(new|in-queue|in-progress|pending-cancel|errored|finished|canceled)

DESCRIPTION
  list all builds for your project

See code: src/commands/build/list.ts

`eas build:resign`

re-sign a build archive

USAGE
  $ eas build:resign [-p android|ios] [-e <value>] [--wait] [--id <value>] [--offset <value>] [--limit <value>]
    [--json --non-interactive]

FLAGS
  -e, --profile=PROFILE_NAME    Name of the build profile from eas.json. Defaults to "production" if defined in
                                eas.json.
  -p, --platform=(android|ios)
  --id=<value>                  ID of the build to re-sign.
  --json                        Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>               The number of items to fetch each query. Defaults to 50 and is capped at 100.
  --non-interactive             Run the command in non-interactive mode.
  --offset=<value>              Start queries from specified index. Use for paginating results. Defaults to 0.
  --[no-]wait                   Wait for build(s) to complete.

DESCRIPTION
  re-sign a build archive

See code: src/commands/build/resign.ts

`eas build:run`

run simulator/emulator builds from eas-cli

USAGE
  $ eas build:run [--latest | --id <value> | --path <value> | --url <value>] [-p android|ios] [-e <value>]
    [--offset <value>] [--limit <value>]

FLAGS
  -e, --profile=PROFILE_NAME    Name of the build profile used to create the build to run. When specified, only builds
                                created with the specified build profile will be queried.
  -p, --platform=(android|ios)
  --id=<value>                  ID of the simulator/emulator build to run
  --latest                      Run the latest simulator/emulator build for specified platform
  --limit=<value>               The number of items to fetch each query. Defaults to 50 and is capped at 100.
  --offset=<value>              Start queries from specified index. Use for paginating results. Defaults to 0.
  --path=<value>                Path to the simulator/emulator build archive or app
  --url=<value>                 Simulator/Emulator build archive url

DESCRIPTION
  run simulator/emulator builds from eas-cli

See code: src/commands/build/run.ts

`eas build:submit`

submit app binary to App Store and/or Play Store

USAGE
  $ eas build:submit [-p android|ios|all] [-e <value>] [--latest | --id <value> | --path <value> | --url <value>]
    [--verbose] [--wait] [--non-interactive]

FLAGS
  -e, --profile=<value>             Name of the submit profile from eas.json. Defaults to "production" if defined in
                                    eas.json.
  -p, --platform=(android|ios|all)
  --id=<value>                      ID of the build to submit
  --latest                          Submit the latest build for specified platform
  --non-interactive                 Run command in non-interactive mode
  --path=<value>                    Path to the .apk/.aab/.ipa file
  --url=<value>                     App archive url
  --verbose                         Always print logs from EAS Submit
  --[no-]wait                       Wait for submission to complete

DESCRIPTION
  submit app binary to App Store and/or Play Store

ALIASES
  $ eas build:submit

`eas build:version:get`

get the latest version from EAS servers

USAGE
  $ eas build:version:get [-p android|ios|all] [-e <value>] [--json --non-interactive]

FLAGS
  -e, --profile=PROFILE_NAME        Name of the build profile from eas.json. Defaults to "production" if defined in
                                    eas.json.
  -p, --platform=(android|ios|all)
  --json                            Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive                 Run the command in non-interactive mode.

DESCRIPTION
  get the latest version from EAS servers

See code: src/commands/build/version/get.ts

`eas build:version:set`

update version of an app

USAGE
  $ eas build:version:set [-p android|ios] [-e <value>]

FLAGS
  -e, --profile=PROFILE_NAME    Name of the build profile from eas.json. Defaults to "production" if defined in
                                eas.json.
  -p, --platform=(android|ios)

DESCRIPTION
  update version of an app

See code: src/commands/build/version/set.ts

`eas build:version:sync`

update a version in native code with a value stored on EAS servers

USAGE
  $ eas build:version:sync [-p android|ios|all] [-e <value>]

FLAGS
  -e, --profile=PROFILE_NAME        Name of the build profile from eas.json. Defaults to "production" if defined in
                                    eas.json.
  -p, --platform=(android|ios|all)

DESCRIPTION
  update a version in native code with a value stored on EAS servers

See code: src/commands/build/version/sync.ts

`eas build:view [BUILD_ID]`

view a build for your project

USAGE
  $ eas build:view [BUILD_ID] [--json]

FLAGS
  --json  Enable JSON output, non-JSON messages will be printed to stderr.

DESCRIPTION
  view a build for your project

See code: src/commands/build/view.ts

`eas channel:create [NAME]`

create a channel

USAGE
  $ eas channel:create [NAME] [--json --non-interactive]

ARGUMENTS
  NAME  Name of the channel to create

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  create a channel

See code: src/commands/channel/create.ts

`eas channel:edit [NAME]`

point a channel at a new branch

USAGE
  $ eas channel:edit [NAME] [--branch <value>] [--json --non-interactive]

ARGUMENTS
  NAME  Name of the channel to edit

FLAGS
  --branch=<value>   Name of the branch to point to
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  point a channel at a new branch

See code: src/commands/channel/edit.ts

`eas channel:list`

list all channels

USAGE
  $ eas channel:list [--offset <value>] [--limit <value>] [--json --non-interactive]

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>    The number of items to fetch each query. Defaults to 10 and is capped at 25.
  --non-interactive  Run the command in non-interactive mode.
  --offset=<value>   Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  list all channels

See code: src/commands/channel/list.ts

`eas channel:rollout [CHANNEL]`

Roll a new branch out on a channel incrementally.

USAGE
  $ eas channel:rollout [CHANNEL] [--action create|edit|end|view] [--percent <value>] [--outcome
    republish-and-revert|revert] [--branch <value>] [--runtime-version <value>] [--private-key-path <value>] [--json
    --non-interactive]

ARGUMENTS
  CHANNEL  channel on which the rollout should be done

FLAGS
  --action=(create|edit|end|view)          Rollout action to perform
  --branch=<value>                         Branch to roll out. Use with --action=create
  --json                                   Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive                        Run the command in non-interactive mode.
  --outcome=(republish-and-revert|revert)  End outcome of rollout. Use with --action=end
  --percent=<value>                        Percent of users to send to the new branch. Use with --action=edit or
                                           --action=create
  --private-key-path=<value>               File containing the PEM-encoded private key corresponding to the certificate
                                           in expo-updates' configuration. Defaults to a file named "private-key.pem" in
                                           the certificate's directory.
  --runtime-version=<value>                Runtime version to target. Use with --action=create

DESCRIPTION
  Roll a new branch out on a channel incrementally.

See code: src/commands/channel/rollout.ts

`eas channel:view [NAME]`

view a channel

USAGE
  $ eas channel:view [NAME] [--json --non-interactive] [--offset <value>] [--limit <value>]

ARGUMENTS
  NAME  Name of the channel to view

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>    The number of items to fetch each query. Defaults to 50 and is capped at 100.
  --non-interactive  Run the command in non-interactive mode.
  --offset=<value>   Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  view a channel

See code: src/commands/channel/view.ts

`eas config`

display project configuration (app.json + eas.json)

USAGE
  $ eas config [-p android|ios] [-e <value>] [--json --non-interactive]

FLAGS
  -e, --profile=PROFILE_NAME    Name of the build profile from eas.json. Defaults to "production" if defined in
                                eas.json.
  -p, --platform=(android|ios)
  --json                        Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive             Run the command in non-interactive mode.

DESCRIPTION
  display project configuration (app.json + eas.json)

See code: src/commands/config.ts

`eas credentials`

manage credentials

USAGE
  $ eas credentials [-p android|ios]

FLAGS
  -p, --platform=(android|ios)

DESCRIPTION
  manage credentials

See code: src/commands/credentials.ts

`eas device:create`

register new Apple Devices to use for internal distribution

USAGE
  $ eas device:create

DESCRIPTION
  register new Apple Devices to use for internal distribution

See code: src/commands/device/create.ts

`eas device:delete`

remove a registered device from your account

USAGE
  $ eas device:delete [--apple-team-id <value>] [--udid <value>] [--json --non-interactive]

FLAGS
  --apple-team-id=<value>  The Apple team ID on which to find the device
  --json                   Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive        Run the command in non-interactive mode.
  --udid=<value>           The Apple device ID to disable

DESCRIPTION
  remove a registered device from your account

See code: src/commands/device/delete.ts

`eas device:list`

list all registered devices for your account

USAGE
  $ eas device:list [--apple-team-id <value>] [--offset <value>] [--limit <value>] [--json --non-interactive]

FLAGS
  --apple-team-id=<value>
  --json                   Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>          The number of items to fetch each query. Defaults to 50 and is capped at 100.
  --non-interactive        Run the command in non-interactive mode.
  --offset=<value>         Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  list all registered devices for your account

See code: src/commands/device/list.ts

`eas device:rename`

rename a registered device

USAGE
  $ eas device:rename [--apple-team-id <value>] [--udid <value>] [--name <value>] [--json --non-interactive]

FLAGS
  --apple-team-id=<value>  The Apple team ID on which to find the device
  --json                   Enable JSON output, non-JSON messages will be printed to stderr.
  --name=<value>           The new name for the device
  --non-interactive        Run the command in non-interactive mode.
  --udid=<value>           The Apple device ID to rename

DESCRIPTION
  rename a registered device

See code: src/commands/device/rename.ts

`eas device:view [UDID]`

view a device for your project

USAGE
  $ eas device:view [UDID]

DESCRIPTION
  view a device for your project

See code: src/commands/device/view.ts

`eas diagnostics`

display environment info

USAGE
  $ eas diagnostics

DESCRIPTION
  display environment info

See code: src/commands/diagnostics.ts

`eas help [COMMAND]`

Display help for eas.

USAGE
  $ eas help [COMMAND] [-n]

ARGUMENTS
  COMMAND  Command to show help for.

FLAGS
  -n, --nested-commands  Include all nested commands in the output.

DESCRIPTION
  Display help for eas.

See code: @expo/plugin-help

`eas init`

create or link an EAS project

USAGE
  $ eas init [--force --id <value>] [--non-interactive ]

FLAGS
  --force            Whether to overwrite any existing project ID
  --id=<value>       ID of the EAS project to link
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  create or link an EAS project

ALIASES
  $ eas init

`eas login`

log in with your Expo account

USAGE
  $ eas login

DESCRIPTION
  log in with your Expo account

ALIASES
  $ eas login

`eas logout`

log out

USAGE
  $ eas logout

DESCRIPTION
  log out

ALIASES
  $ eas logout

`eas metadata:lint`

validate the local store configuration

USAGE
  $ eas metadata:lint [--json] [--profile <value>]

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr
  --profile=<value>  Name of the submit profile from eas.json. Defaults to "production" if defined in eas.json.

DESCRIPTION
  validate the local store configuration

See code: src/commands/metadata/lint.ts

`eas metadata:pull`

generate the local store configuration from the app stores

USAGE
  $ eas metadata:pull [-e <value>]

FLAGS
  -e, --profile=<value>  Name of the submit profile from eas.json. Defaults to "production" if defined in eas.json.

DESCRIPTION
  generate the local store configuration from the app stores

See code: src/commands/metadata/pull.ts

`eas metadata:push`

sync the local store configuration to the app stores

USAGE
  $ eas metadata:push [-e <value>]

FLAGS
  -e, --profile=<value>  Name of the submit profile from eas.json. Defaults to "production" if defined in eas.json.

DESCRIPTION
  sync the local store configuration to the app stores

See code: src/commands/metadata/push.ts

`eas open`

open the project page in a web browser

USAGE
  $ eas open

DESCRIPTION
  open the project page in a web browser

See code: src/commands/open.ts

`eas project:info`

information about the current project

USAGE
  $ eas project:info

DESCRIPTION
  information about the current project

See code: src/commands/project/info.ts

`eas project:init`

create or link an EAS project

USAGE
  $ eas project:init [--force --id <value>] [--non-interactive ]

FLAGS
  --force            Whether to overwrite any existing project ID
  --id=<value>       ID of the EAS project to link
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  create or link an EAS project

ALIASES
  $ eas init

See code: src/commands/project/init.ts

`eas secret:create`

create an environment secret on the current project or owner account

USAGE
  $ eas secret:create [--scope account|project] [--name <value>] [--value <value>] [--type string|file] [--force]
    [--non-interactive]

FLAGS
  --force                    Delete and recreate existing secrets
  --name=<value>             Name of the secret
  --non-interactive          Run the command in non-interactive mode.
  --scope=(account|project)  [default: project] Scope for the secret
  --type=(string|file)       The type of secret
  --value=<value>            Text value or path to a file to store in the secret

DESCRIPTION
  create an environment secret on the current project or owner account

See code: src/commands/secret/create.ts

`eas secret:delete`

delete an environment secret by ID

USAGE
  $ eas secret:delete [--id <value>] [--non-interactive]

FLAGS
  --id=<value>       ID of the secret to delete
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  delete an environment secret by ID

See code: src/commands/secret/delete.ts

`eas secret:list`

list environment secrets available for your current app

USAGE
  $ eas secret:list

DESCRIPTION
  list environment secrets available for your current app

See code: src/commands/secret/list.ts

`eas secret:push`

read environment secrets from env file and store on the server

USAGE
  $ eas secret:push [--scope account|project] [--env-file <value>] [--force] [--non-interactive]

FLAGS
  --env-file=<value>         Env file with secrets
  --force                    Delete and recreate existing secrets
  --non-interactive          Run the command in non-interactive mode.
  --scope=(account|project)  [default: project] Scope for the secrets

DESCRIPTION
  read environment secrets from env file and store on the server

See code: src/commands/secret/push.ts

`eas submit`

submit app binary to App Store and/or Play Store

USAGE
  $ eas submit [-p android|ios|all] [-e <value>] [--latest | --id <value> | --path <value> | --url <value>]
    [--verbose] [--wait] [--non-interactive]

FLAGS
  -e, --profile=<value>             Name of the submit profile from eas.json. Defaults to "production" if defined in
                                    eas.json.
  -p, --platform=(android|ios|all)
  --id=<value>                      ID of the build to submit
  --latest                          Submit the latest build for specified platform
  --non-interactive                 Run command in non-interactive mode
  --path=<value>                    Path to the .apk/.aab/.ipa file
  --url=<value>                     App archive url
  --verbose                         Always print logs from EAS Submit
  --[no-]wait                       Wait for submission to complete

DESCRIPTION
  submit app binary to App Store and/or Play Store

ALIASES
  $ eas build:submit

See code: src/commands/submit.ts

`eas update`

publish an update group

USAGE
  $ eas update [--branch <value>] [--channel <value>] [-m <value>] [--republish | --input-dir <value> |
    --skip-bundler] [--group <value> |  | ] [--clear-cache] [-p android|ios|all] [--dev] [--auto] [--private-key-path
    <value>] [--json --non-interactive]

FLAGS
  -m, --message=<value>             A short message describing the update
  -p, --platform=(android|ios|all)  [default: all]
  --auto                            Use the current git branch and commit message for the EAS branch and update message
  --branch=<value>                  Branch to publish the update group on
  --channel=<value>                 Channel that the published update should affect
  --clear-cache                     Clear the bundler cache before publishing
  --dev                             Publish a development bundle
  --group=<value>                   Update group to republish (deprecated, see republish command)
  --input-dir=<value>               [default: dist] Location of the bundle
  --json                            Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive                 Run the command in non-interactive mode.
  --private-key-path=<value>        File containing the PEM-encoded private key corresponding to the certificate in
                                    expo-updates' configuration. Defaults to a file named "private-key.pem" in the
                                    certificate's directory.
  --republish                       Republish an update group (deprecated, see republish command)
  --skip-bundler                    Skip running Expo CLI to bundle the app before publishing

DESCRIPTION
  publish an update group

See code: src/commands/update/index.ts

`eas update:configure`

configure the project to support EAS Update

USAGE
  $ eas update:configure [-p android|ios|all] [--non-interactive]

FLAGS
  -p, --platform=(android|ios|all)  [default: all] Platform to configure
  --non-interactive                 Run the command in non-interactive mode.

DESCRIPTION
  configure the project to support EAS Update

See code: src/commands/update/configure.ts

`eas update:delete GROUPID`

delete all the updates in an update group

USAGE
  $ eas update:delete GROUPID [--json --non-interactive]

ARGUMENTS
  GROUPID  The ID of an update group to delete.

FLAGS
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  delete all the updates in an update group

See code: src/commands/update/delete.ts

`eas update:list`

view the recent updates

USAGE
  $ eas update:list [--branch <value> | --all] [--offset <value>] [--limit <value>] [--json --non-interactive]

FLAGS
  --all              List updates on all branches
  --branch=<value>   List updates only on this branch
  --json             Enable JSON output, non-JSON messages will be printed to stderr.
  --limit=<value>    The number of items to fetch each query. Defaults to 25 and is capped at 50.
  --non-interactive  Run the command in non-interactive mode.
  --offset=<value>   Start queries from specified index. Use for paginating results. Defaults to 0.

DESCRIPTION
  view the recent updates

See code: src/commands/update/list.ts

`eas update:republish`

roll back to an existing update

USAGE
  $ eas update:republish [--channel <value> | --branch <value> | --group <value>] [-m <value>] [-p android|ios|all]
    [--private-key-path <value>] [--json --non-interactive]

FLAGS
  -m, --message=<value>             Short message describing the republished update group
  -p, --platform=(android|ios|all)  [default: all]
  --branch=<value>                  Branch name to select an update group to republish from
  --channel=<value>                 Channel name to select an update group to republish from
  --group=<value>                   Update group ID to republish
  --json                            Enable JSON output, non-JSON messages will be printed to stderr.
  --non-interactive                 Run the command in non-interactive mode.
  --private-key-path=<value>        File containing the PEM-encoded private key corresponding to the certificate in
                                    expo-updates' configuration. Defaults to a file named "private-key.pem" in the
                                    certificate's directory.

DESCRIPTION
  roll back to an existing update

See code: src/commands/update/republish.ts

`eas update:roll-back-to-embedded`

roll back to the embedded update

USAGE
  $ eas update:roll-back-to-embedded [--branch <value>] [--channel <value>] [--message <value>] [-p android|ios|all] [--auto]
    [--private-key-path <value>] [--json --non-interactive]

FLAGS
  -p, --platform=(android|ios|all)  [default: all]
  --auto                            Use the current git branch and commit message for the EAS branch and update message
  --branch=<value>                  Branch to publish the rollback to embedded update group on
  --channel=<value>                 Channel that the published rollback to embedded update should affect
  --json                            Enable JSON output, non-JSON messages will be printed to stderr.
  --message=<value>                 A short message describing the rollback to embedded update
  --non-interactive                 Run the command in non-interactive mode.
  --private-key-path=<value>        File containing the PEM-encoded private key corresponding to the certificate in
                                    expo-updates' configuration. Defaults to a file named "private-key.pem" in the
                                    certificate's directory.

DESCRIPTION
  roll back to the embedded update

See code: src/commands/update/roll-back-to-embedded.ts

`eas update:rollback`

roll back to an embedded update or an existing update

USAGE
  $ eas update:rollback [--private-key-path <value>]

FLAGS
  --private-key-path=<value>  File containing the PEM-encoded private key corresponding to the certificate in
                              expo-updates' configuration. Defaults to a file named "private-key.pem" in the
                              certificate's directory.

DESCRIPTION
  roll back to an embedded update or an existing update

See code: src/commands/update/rollback.ts

`eas update:view GROUPID`

update group details

USAGE
  $ eas update:view GROUPID [--json]

ARGUMENTS
  GROUPID  The ID of an update group.

FLAGS
  --json  Enable JSON output, non-JSON messages will be printed to stderr.

DESCRIPTION
  update group details

See code: src/commands/update/view.ts

`eas webhook:create`

create a webhook

USAGE
  $ eas webhook:create [--event BUILD|SUBMIT] [--url <value>] [--secret <value>] [--non-interactive]

FLAGS
  --event=(BUILD|SUBMIT)  Event type that triggers the webhook
  --non-interactive       Run the command in non-interactive mode.
  --secret=<value>        Secret used to create a hash signature of the request payload, provided in the
                          'Expo-Signature' header.
  --url=<value>           Webhook URL

DESCRIPTION
  create a webhook

See code: src/commands/webhook/create.ts

`eas webhook:delete [ID]`

delete a webhook

USAGE
  $ eas webhook:delete [ID] [--non-interactive]

ARGUMENTS
  ID  ID of the webhook to delete

FLAGS
  --non-interactive  Run the command in non-interactive mode.

DESCRIPTION
  delete a webhook

See code: src/commands/webhook/delete.ts

`eas webhook:list`

list webhooks

USAGE
  $ eas webhook:list [--event BUILD|SUBMIT] [--json]

FLAGS
  --event=(BUILD|SUBMIT)  Event type that triggers the webhook
  --json                  Enable JSON output, non-JSON messages will be printed to stderr.

DESCRIPTION
  list webhooks

See code: src/commands/webhook/list.ts

`eas webhook:update`

update a webhook

USAGE
  $ eas webhook:update --id <value> [--event BUILD|SUBMIT] [--url <value>] [--secret <value>] [--non-interactive]

FLAGS
  --event=(BUILD|SUBMIT)  Event type that triggers the webhook
  --id=<value>            (required) Webhook ID
  --non-interactive       Run the command in non-interactive mode.
  --secret=<value>        Secret used to create a hash signature of the request payload, provided in the
                          'Expo-Signature' header.
  --url=<value>           Webhook URL

DESCRIPTION
  update a webhook

See code: src/commands/webhook/update.ts

`eas webhook:view ID`

view a webhook

USAGE
  $ eas webhook:view ID

ARGUMENTS
  ID  ID of the webhook to view

DESCRIPTION
  view a webhook

See code: src/commands/webhook/view.ts

`eas whoami`

show the username you are logged in as

USAGE
  $ eas whoami

DESCRIPTION
  show the username you are logged in as

ALIASES
  $ eas whoami

Name		Name	Last commit message	Last commit date
Latest commit History 1,845 Commits
.github		.github
bin		bin
jest		jest
packages		packages
scripts		scripts
ts-declarations		ts-declarations
.editorconfig		.editorconfig
.eslintignore		.eslintignore
.eslintrc.js		.eslintrc.js
.gitattributes		.gitattributes
.gitignore		.gitignore
.prettierrc		.prettierrc
.yarnrc		.yarnrc
CHANGELOG.md		CHANGELOG.md
CODEOWNERS		CODEOWNERS
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md
RELEASING.md		RELEASING.md
SECURITY.md		SECURITY.md
codecov.yml		codecov.yml
jest.config.js		jest.config.js
lerna.json		lerna.json
package.json		package.json
yarn.lock		yarn.lock

License

sounlida/eas-cli

Folders and files

Latest commit

History

Repository files navigation

eas-cli

Installation

Enforcing eas-cli version for your project

Usage

Commands

eas account:login

eas account:logout

eas account:view

eas analytics [STATUS]

eas autocomplete [SHELL]

eas branch:create [NAME]

eas branch:delete [NAME]

eas branch:list

eas branch:rename

eas branch:view [NAME]

eas build

eas build:cancel [BUILD_ID]

eas build:configure

eas build:inspect

eas build:list

eas build:resign

eas build:run

eas build:submit

eas build:version:get

eas build:version:set

eas build:version:sync

eas build:view [BUILD_ID]

eas channel:create [NAME]

eas channel:edit [NAME]

eas channel:list

eas channel:rollout [CHANNEL]

eas channel:view [NAME]

eas config

eas credentials

eas device:create

eas device:delete

eas device:list

eas device:rename

eas device:view [UDID]

eas diagnostics

eas help [COMMAND]

eas init

eas login

eas logout

eas metadata:lint

eas metadata:pull

eas metadata:push

eas open

eas project:info

eas project:init

eas secret:create

eas secret:delete

eas secret:list

eas secret:push

eas submit

eas update

eas update:configure

eas update:delete GROUPID

eas update:list

eas update:republish

eas update:roll-back-to-embedded

eas update:rollback

eas update:view GROUPID

eas webhook:create

eas webhook:delete [ID]

eas webhook:list

eas webhook:update

eas webhook:view ID

eas whoami

About

Resources