Power Ethernet (DTE Power via MDI) MIB
draft-romascanu-hubmib-power-ethernet-mib-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Dan Romascanu , Avi Berger | ||
| Last updated | 2001-02-22 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The document proposes an extension to the Ethernet-like Interfaces MIB [RFC2665] with a set of objects for managing a power Ethernet Powered Device (PD) and/or Power Source Equipment (PSE).
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)