Uson - Air Leak & Flow Measurement Solutions

Leak integrity defines patient safety – and as devices get smaller and more complex, the margin for error shrinks. So we wrote the guide we wish every engineer had on the bench: the Medical Device Leak Testing Engineer’s Handbook. Inside: setting leak-rate specs, choosing the right test method, controlling temperature and creep, fixture design, and preventing false fails. Download the full handbook today at: https://lnkd.in/eDpnjxvX #leaktesting #medicaldevices #medtech #qualityengineering

Every engineer developing a new leak test method eventually hits the same wall, you need to try things, adjust parameters and see what happens, but you cannot afford to risk the validated programs already running on the line. The fourth video in our Astra Dash leak testing series covers sandbox mode, a dedicated experimentation environment where you can load an existing method, run live tests, adjust parameters and analyze pressure curves in real time without touching a single production program. Allen Simpson also walks through version control so you can track exactly what changes between iterations, which matters especially when you're developing methods for complex parts with multiple test conditions. If your team has ever needed a separate R&D tester just to safely develop and refine a method, this video shows why that workaround is no longer necessary. Watch the fourth installation of our Astra Dash video series below or catch up on the full series today by visiting: https://lnkd.in/eAaqtHwW #AstraDash #innovation #sandbox #leaktesting

A program that works in setup and a program that works on your production floor are two different things. The gap between them is usually in the configuration, and it looks different depending on whether you're an engineer who needs full diagnostic visibility or an operator who just needs to run the line without distraction. Video 3 in our Astra Dash series covers the full configuration layer with Jonathan Cole. Custom pressure limits and leak thresholds for your part, cycle time reduction through proper fill and stabilize settings, and production views that work for both sides of the floor, detailed enough for an engineer troubleshooting a problem, and simple enough for an operator running production without distraction. By the end of this video, you will have your production view configured for both engineering and operator use, your custom limits set and your cycle time dialed in for your specific part. Watch the third installment below. Catch up on the full series today by visiting: https://lnkd.in/er9E5KNn #AstraDash #innovation #howto #setup #configuration

Meet the Expert Allen Simpson | Engineering Department Head, Uson Meet Uson’s Head of Engineering and the catalyst behind the Astra Dash, Allen. Read our full interview to learn where leak testing typically breaks down, and what it takes to build systems that align with how R&D and manufacturing teams actually work. #experts #team #innovation #engineering #astradash #leaktesting

What if your leak tester could ask you the right questions, and build the test for you? The Astra Dash doesn't just run programs. It helps you create them. The built-in setup wizard acts like a technical consultant on-call: it interrogates your part, suggests configurations, and hands you a production-ready recipe, right on the touchscreen. This is what 20 years of leak testing expertise looks like when it's baked into the interface. Missed the first installment of the series? Catch up here: https://hubs.la/Q04frc2D0 #AstraDash #innovation #leaktesting

Every R&D team has lived this moment. You spend weeks developing the right leak test method, validation is complete, documentation is done... and then it moves to production and the rework begins. Now you need a new tester, new setup, and new validation cycle. Weeks of work undone not because the method was wrong, but because the equipment couldn't follow it into production. The Astra Dash was built to close that gap. One modular platform that follows your product from development to the production floor using same method, same recipe, same result, without starting over. See how it works by watching our video below. To learn more about the Astra Dash, visit https://hubs.la/Q048wBHF0 #astradash #innovation #leaktesting

There's just one week left to register for our upcoming technical workshop with Invio Automation and to secure your chance to see a live demonstration of the Uson Astra Dash – the world’s first modular, pneumatically independent, multi-channel leak tester. On March 31 and April 1, Invio will host this hands-on session at their Hudson, New Hampshire facility, bringing together engineers and operations leaders focused on scaling medical device production with confidence. Participants will gain: • A practical framework for evaluating and justifying automation investments • Guidance on developing a scalable automation strategy • Hands-on time with the Astra Dash – including the opportunity to run your own part through a live test Space is limited – reserve your spot today: https://hubs.la/Q047y94K0 #AstraDash #technicalworkshop #medicaldevice #partnership #innovation

We’re excited to partner with Invio Automation for an upcoming technical workshop and live demonstration of the Uson Astra Dash – the world’s first modular, pneumatically independent, multi-channel leak tester. On March 31 and April 1, Invio will host this hands-on session at their Hudson, NH facility, bringing together engineers and operations leaders focused on scaling medical device production with confidence. Participants will gain: • A practical framework for evaluating and justifying automation investments • Guidance on developing a scalable automation strategy • Hands-on time with the Astra Dash – including the opportunity to run your own part through a live test Space is limited – reserve your spot today: https://hubs.la/Q045_NjV0 #AstraDash #technicalworkshop #medicaldevice #partnership #innovation

We're partnering with Uson - Air Leak & Flow Measurement Solutions for something different. On March 31 and April 1, Invio Automation is hosting a technical workshop and live demonstration of the Uson Astra Dash — the world's first modular, pneumatically independent, multi-channel leak tester — at our Hudson, NH facility. This is a working session for engineers and operations leaders serious about scaling medical device production with confidence. You'll walk away with:   • A clear framework for evaluating and justifying automation investment   • Practical guidance on building your automation strategy   • Hands-on time with the Astra Dash — including the option to run your own part through a live test Seats are limited. Registration link in the comments.